A factory in Belgium was already generating from a rigid rooftop PV array mounted on ballasted tilt frames across the flat roof areas. What those areas did not cover was the barrel vault running down the centre of the building, a continuously curved surface with no plane to seat a frame on. The customer bought 20 LIONSHEE 240 W flexible modules for that vault, adding 4800 W - 4.8 kWp - of rated capacity without touching the rigid array already in service. This case looks at why a framed glass module cannot use a barrel vault, how the flexible row follows the curvature, and what the two module formats do side by side on one roof. No yield, savings, inverter, mounting or commissioning figures were available for this project and none are estimated. Read More

An independent event equipment supplier in South Korea needed a lightweight generating surface for a temporary concert canopy on a fixed deadline. The final order, placed on 4 August 2026, was 16 packs of two 240 W LIONSHEE flexible modules, 32 modules and 7.68 kWp in total. The cartons were reinforced with wooden framing and the carrier record shows delivery completed on 11 August at 09:55 local time, one day ahead of the requested date. The customer confirmed a successful installation on 17 August and reported that the finished canopy was used at a BIGBANG concert. This case follows the project from first enquiry to site photographs, with the customer's own messages. Read More

LIONSHEE is recruiting distribution partners across Europe for balcony solar and modular home storage. We hold stock in UK and German warehouses, support dropshipping from a single unit, and have completed the CE, UKCA, RoHS and GPSR conformity work per model, including an appointed EU Authorised Representative. Price tiers and territory protection are available for partners with an existing customer base. This page sets out the documentation position by market, the difference between local stock and container ordering, and what we look for in a partner. Read More

An Italian residential customer started with four 240W LIONSHEE flexible panels and one 800W microinverter, ran the system for seven months, then added an LS-H1600 Smart Solar Hub with two LS-L1024 batteries for 2048Wh of storage. He referred a friend and repeated the same storage configuration for a second property. This case follows all three orders with the customer's own messages, photographs and quotes, and lists the exact equipment used at each stage. Read More

On 27 August 2026, SI 2026/848 gives the UK its first legal route for plug-in solar devices up to 800W AC output. This article explains what the new plug-in microgenerator category covers, why the Ofgem cap of 26.11p per kWh and record summer heat make balcony solar economically relevant now, and why battery storage was deliberately excluded from the plug-in route and still requires a BS 7671 installation with G98 notification. It closes with the LIONSHEE modular balcony storage specification and UK warehouse availability for distributors and installers. Read More

On 27 August 2026 the UK legalises plug-in solar devices up to 800W AC output, using a specification built on the German standard DIN VDE 0126-95. Germany registered 426,269 balcony solar systems in 2025, EU household cooling energy has doubled since 2018, and EU household electricity averaged EUR 28.96 per 100 kWh in H2 2025. This article sets out what the UK route covers, why batteries are excluded and still require a BS 7671 installation with G98 notification, what European installations look like in practice, and the LIONSHEE modular balcony storage specification with UK and German warehouse availability. Read More